 |
|
|
| Tungsten Carbide Parts, Plates, Blanks, Inserts and Hard Metal Blades |
| 1.Tungsten Carbide Hard metal wear Plates, Parts, Dies, Balls, Blanks, Blade Inserts, Sheets, Tiles, Strips etc. |
| AMT is the professional manufacturer of the tungsten carbide Hard metal wear Plates, Parts, Dies, Balls, Blanks, Blade Inserts for snow plow, Sheets, Tiles, Blocks, Strips of YG6 and YG8 etc. |
Content of WC (%) |
Cobalt (%) |
YG6 and YG8 Hardness of Cemented Carbide Parts |
YG6 and YG8 Bend Strength of Cemented Carbide Parts |
Block Section (mm) |
The Balance |
6-8 |
≥89 HRA |
≥1520 N/mm2 |
2-3, 3-6,
6-8 |
|
| 2. Pellets of Sintered Tungsten Carbide with Cobalt |
Grade |
BW1 |
BW2 |
BW3 |
BW4 |
BW11 |
BW12 |
Composition (wt%) |
WC |
≥85 |
≥90 |
≥93 |
96.0±0.5 |
≥90.5 |
≥91.5 |
Co |
14-15 |
9.5-10 |
6.5-7.0 |
3.5-4.0 |
8.9-9.5 |
7.7-8.3 |
Density (g/cm2) |
13.9-14.1 |
14.1-14.6 |
14.4-14.8 |
14.6-15.0 |
11.2-12.7 |
12.5-13.2 |
Hardness (HV) kg/mm2 (Load=100g) |
≥1140 |
≥1140 |
≥1300 |
≥1400 |
≥1350 |
≥1300 |
Porosity (ISO Std) |
A02 B02 C00 |
Microstructure |
No decarbonization and no cobalt concentration |
Particle Size |
0.5mm-8mm (4-35mesh) |
|
| Note: Other specifications can be available as per customer's requirements. |
|
 |
 |
 |
|
